LAMRA6.2 accessories

Description

LAMRA6.2 MOLLE strap
– One of these is included with a shell holder. This is a spare strap that allows LAMRA6.2 to be attached to 1-3 PALS grids.
– Included: 1 pcs MOLLE strap

LAMRA6.2 hook&loop plate
– This is not included in the LAMRA6.2 shell holder. Allows LAMRA6.2 to be attached to a hook/loop panel.
– Caution: will attach extremely strongly. Once attached, will require cutting of the plate or specialty tools to be removed.
– Assembly: bend the plate approx 90 degrees and bend the wings of the plate. Slide the wings in to the PALS-loops of the shell holder. Bend the plate back in to shape and attach hook/loop tape.
– Included: 1pcs hook&loop plate and hook&loop tape.

S-Biner Dual Carabiner #3 BLACK
– Nite Ize stainless steel black dual carabiner rated for 11kg
– Height of the #3 carabiner is basically two PALS-grids. This carabiner is good for 25mm (1″) webbing, 1 or 2 PALS grids or anything smaller.
– Very quick attachment and removal of LAMRA6.2. Caution: no lock.
– Extremely handy carabiner to attach also anything else to your equipment.
– Included: 1 pcs carabiner

S-Biner Dual Carabiner #4 BLACK
– Nite Ize stainless steel black dual carabiner rated for 33 kg.
– Height of the #4 carabiner is basically three PALS-grids. This carabiner is good for 30mm (1.2″) webbing, 1 or 3 PALS grids or anything smaller.
– Very quick attachment and removal of LAMRA6.2. Caution: no lock.
– Extremely handy carabiner to attach also anything else to your equipment.
– Included: 1 pcs carabiner