Optimize your Benelli Progressive Comfort stock length exactly to your preference. With this kit the length of pull can be increased up to +37.5mm (1.5in) in 2.5mm (0.1in) increments
Compatible with Benelli 828U, SBE3 Wood, Raffaello Wood, Colombo, Argo E Pro that have a wooden stock and use the Progressive Comfort system. Not compatible with Benelli 828U Sport (Progressive Balancing) or Lupo (synthetic stock).
– 20mm spacer
– 10mm spacer
– 5mm spacer
– 2.5mm spacer
– screw set
– remove recoil pad and Progressive Comfort System from the stock
– insert the wanted amount of spacers on to the Comfort System
– pin can be used to align the stack of spacers (not necessary)
– assemble the combination with appropriate screws
NOTE! Using too long screws can leave the spacers loose or damage the stock. Select screw/spacer combination so that the screw inside the wooden stock is similar or slightly shorter than original. Do not use screw that inserts deeper in to the stock than than original screws (approx 18mm, see picture)!
Weight: from 5g to 66g